SKU RYC010603

Windshield 3

SKU RYC010603
  • Significant improvement in exterior wind attenuation: up to 25dB
  • Unique slide-on/slide-off system
  • Twist and turn locking end caps provide secure fastening
  • Lightweight and durable
  • Suitable for microphones from 161mm up to 210mm in length
Description
The perfect solution for improving exterior wind attenuation for your microphone. This standard modular windshield, with a body length of 260mm, is designed to provide up to 25dB of wind protection. Made from a flexible grey plastic netting tube with a special screening material attached, this windshield is both lightweight and durable. The twist and turn locking end caps ensure easy, rattle-free and secure fastening. The unique slide-on/slide-off system allows for easy removal of the microphone and suspension, making it convenient for on-the-go recording. The outside diameter of the Mono Windshields is 100mm, while the stereo windshields are 145mm, with the length determined by the microphone used.
Warranty

Warranty Rycote

The Rycote European Warranty offers 24-month coverage for Rycote products purchased within the European Union, Iceland, Norway, Switzerland, and Turkey.

MANUFACTURER’S LIMITED WARRANTY
Rycote Microphone Windshields Ltd (“Rycote”) warrants to purchasers of Rycote manufactured products (“Products”) within the European Union, Iceland, Norway, Switzerland and Turkey (“Purchasers” or a “Purchaser” as the context may require) that during the warranty period (as defined below), Rycote or a Rycote authorised distributor will, in a commercially reasonable time, remedy defects in materials, design and workmanship in Products free of charge by repairing or, should Rycote in its discretion deem it necessary, replacing the Product in accordance with this Warranty (unless otherwise required by law). This Warranty is only valid and enforceable in the country where the Purchaser has purchased the Product provided that Rycote has intended the Product for sale in that country. However, if the Purchaser purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and Rycote originally intended the Product for sale in one of those countries, this Warranty is valid and enforceable in all of those above listed countries.

WARRANTY PERIOD
The warranty period starts on the date of the Product’s original purchase by the first end-user Purchaser and expires twenty four months after that date (hereinafter the “Warranty Period”). The Warranty Period will not be extended or renewed or otherwise affected due to subsequent resale, Rycote authorised repair or replacement of the Product.

HOW TO GET WARRANTY SERVICE
If a Purchaser wishes to make a claim under this Warranty, the Product or the affected part (if it is not the entire Product) should be returned to a Rycote authorised distributor. Contact Rycote on sales@rycote.com for further details on how to make a claim. Information concerning Rycote distributors can be found on the Rycote website. Any claim under this Warranty is subject to the Purchaser notifying Rycote or a Rycote authorised distributor of the alleged defect within a reasonable time of it having come to the attention of the Purchaser and in any event no later than expiry of the Warranty Period. When making a claim under this Warranty, the Purchaser will be required to provide: a) the Product (or the affected part) and b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase & the Product type.

WHAT IS NOT COVERED?
This Warranty does not cover a) normal wear and tear, b) defects caused by rough handling (including, without limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), or c) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Rycote (e.g. as set out in the Product’s user guide) and/or e) other acts beyond the reasonable control of Rycote. This Warranty does not cover defects or alleged defects caused by the fact that the Product was used with otherwise than for its intended use. This Warranty is not enforceable if the Product has been modified or repaired by anyone other than a Rycote authorised distributor or if it is repaired using unauthorised spare parts (to be determined in the sole discretion of Rycote). This Warranty is not enforceable if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes in such conditions; to corrosion, to spillage of food or liquid or to influence from chemical products.

OTHER IMPORTANT NOTICES
If the Product is found not to be covered by the terms and conditions of this Warranty, Rycote and its authorised distributors reserve the right to charge a handling fee. When repairing or replacing the Product, Rycote may use products or parts that are new, equivalent to new or re-conditioned.

LIMITATION OF RYCOTE’S LIABILITY
This Warranty replaces all other Rycote warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s), Rycote does not assume any liability for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, Rycote’s liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of Rycote or in case of death or personal injury resulting from Rycote’s negligence.

Device Compatibility

Small Diaphragm Condenser

  1. beyerdynamic MC 728
    For more information on this specific microphone, visit the brand website.
  2. beyerdynamic MC 718
    For more information on this specific microphone, visit the brand website.
  3. sennheiser ME 62 K6
    The ME 62 is designed for use with the K6 and K6P powering modules. It can be used for reporting, discussions and interviews, and is particularly suitable for good reproduction of 'room' ambience and 'spaced omni' stereo recording. It has a matte black, anodised, scratch resistant finish. Length shown is for head only.
  4. schoeps CMC Series (With Cut 1)
    The capsules of condenser microphones (the only type which SCHOEPS manufactures) can't be connected directly to microphone cables or inputs; a microphone amplifier is required in between. Thus a complete microphone of the Colette series comprises any of the twenty available types of capsules combined with an amplifier. The CMC 6 Ug is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognises the supply voltage and adjusts itself automatically. Its performance characteristics remain essentially the same either way; mainly, the difference is that the current drawn at 12 Volts is greater than at 48 Volts. However, the 12-Volt mode consumes less power and might be preferred for battery-powered recording.

Handheld/Reporter Mic

  1. beyerdynamic M 69
    Rugged microphone for lead vocals and instrumentation. Excellent off-axis rejection.

Shotgun Mic

  1. sony ECM 673
    The Sony ECM-673is a short shotgun, electret condenser-type microphone which delivers excellent sound performance in field and studio production applications at an affordable price. Optimised for use with Sony compact camcorders such as the HDV Series and DVCAM Series, the ECM-673 offers high-sensitivity, low-noise characteristics and a flat-and-wide frequency response in a compact and lightweight body. In addition, its highly directional response and extreme durability allow clear voice pickup, even in harsh operational environments. With its high performance, compact design and high durability, the ECM-673 microphone is an ideal choice for quality-critical sound-acquisition applications.
  2. shure VP82
    Compact and lightweight, with wide aperture and excellent off-axis rejection, the VP82 is the affordable and reliable choice for camera-mounted A / V media production applications. For use in sound capture and sound reinforcement.
  3. audiotechnica AT 875 (AT875R)
    For more information on this specific microphone, visit the brand website.
  4. røde NTG-1
    A lightweight shotgun condenser microphone for general film and TV use. The output is electronically balanced and uses low-noise surface-mount components. It is extremely lightweight and has both a wide bandwidth and a controlled polar response.

FAQ

No Questions
Go back
Show more