Boom Shock Mounts

Industry-leading shock and handling isolation for Broadcast & Film applications.

Rycote’s InVision Broadcast & Film products are designed for discreet, low-profile boom mounted use in broadcast environments where full basket windshielding is not required. Professional isolation utilising Lyre suspension systems provides industry-leading shock and handling isolation for broadcast & film applications.

InVision
Broadcast & Film

InVision Broadcast & Film

InVision Broadcast & Film Suspensions provide unparalleled protection against shock, vibration, and handling noise for miniature, probe, handheld, and shotgun microphones. Utilising Rycote’s exclusive Lyre technology, these virtually unbreakable shock-mounts are designed with an integral cable clamp to isolate the microphone from cable and stand-borne noise.

With several models designed for use with a vast number of microphone makes and models, InVision Broadcast & Film suspensions provide outstanding shock and handling isolation performance with microphones mounted to boom poles, as well as floor, desk, and suspended stands.

There is only one Rycote®| Look for the Rycote logo

INV-Lite

The balanced, lightweight choice for short shotgun mics.

The INV-Lite has been designed specifically for interior boom use with a foam windscreen. It offers a more focused solution for smaller, lighter shotgun microphones, allows full placement of a 12cm SGM foam to provide basic wind and plosive protection indoors, and provides super-fast access to the microphone via the revolutionary cam-lever clamp system.

INV-Lite

The balanced, lightweight choice for short shotgun mics.

The INV-Lite has been designed specifically for interior boom use with a foam windscreen. It offers a more focused solution for smaller, lighter shotgun microphones, allows full placement of a 12cm SGM foam to provide basic wind and plosive protection indoors, and provides super-fast access to the microphone via the revolutionary cam-lever clamp system.

Unique cam-lever clamp with wide Lyre® design.

Elegant. Ergonomic. Balanced.

Unique cam-lever clamp holds the mic securely, leaving interference slots free improving sound quality and directionality. Adding a foam windscreen to protect against plosives and light boom swings is fast and simple.

Features

Designed for shorter, lighter shotgun mics.
Unique design ensures cancellation slots are free.
Patented Lyre® technology with new ‘wide’ Lyre® design allowing full foam placement.
Balanced and lightweight, perfect for indoor boom work.
Revolutionary cam-lever clamp system.
Robust, reliable Rycote quality.
Weighs just 115g (without brass screw adaptor).

INV-Lite Mic Compatibility

INV-Lite 19 (041136)
DPA 4017B, 4017C; 4018
Sanken CS-1e
Sennheiser MKH 8060, 8050, 8040, 8020

Suitable for mics of 19mm diameter, up to 210mm in length, weighing no more than 120 grams.

INV-Lite 21 (041135)
Schoeps MiniCMIT

Suitable for mics of 21mm diameter, up to 210mm in length weighing no more than 120 grams.

What’s in the box

INV-Lite shock mount
Brass 3/8” M to 5/8” F Screw Adaptor
Quick Start Guide

Works perfectly with

Rycote 12cm SGM Foam
Rycote Softie-Lite windshield

Go faster.

The Softie-Lite is a slip-on windshield designed to perfectly complement the INV-Lite shock-mount, allowing for even faster/deeper boom swings indoors. Softie-Lite provides more plosive and wind protection than a standard foam.

Features

Designed specifically for the INV-Lite shock-mount.
For use with shorter, lighter shotgun mics for interior booming.
Provides more protection against plosives and wind-noise than a foam windshield.
Allows for outdoor use – in light winds.
Available in two versions; for 19mm and 21mm microphones respectively.
Lightweight & compact – just 27g and only 170cm long*.

You can buy the Softie-Lite on its own, or as a ‘Kit’, complete with the INV-Lite shock-mount (see below).

*All measurements approximate.

Softie-Lite Mic Compatibility

Two versions of the Softie-Lite are available; a 19mm and a 21mm variant. These are easily differentiated by the different colour TPE ‘collar’ which ensures a tight grip on the mic; blue for the 19mm / green for the 21mm.

Softie-Lite 19 (031103)
DPA 4017B and 4017C
Sanken CS-1e
Sennheiser MKH 8060

Softie-Lite 21 (031104)
Schoeps MiniCMIT

N.B. The Softie-Lite is not suitable for shorter mics like the Sennheiser 8050 or the DPA 4018. For these mics, the INV-Lite partnered with a Rycote Baseball is the way to go!

Softie-Lite Kit

The Softie-Lite windshield and the INV-Lite shock-mount are also available together, as an all-in-one ‘kit’, which also includes an XLR cable and holder.

Features

INV-Lite shock-mount, fitted with XLR holder on boss.
Softie-Lite windshield.
Pre-fitted XLR cable (XLR-3M to short right-angled XLR-3F).
Lightweight – just 217g (inc. Softie-Lite).

Softie-Lite Kit Mic Compatibility

Two versions of the Softie-Lite Kit are available; a 19mm and a 21mm variant. Each Kit contains the correct sized INV-Lite shock-mount, appropriate for the Softie-Lite chosen.

Softie-Lite Kit 19 (031101)
DPA 4017B and 4017C
Sanken CS-1e
Sennheiser MKH 8060

Softie-Lite Kit 21 (031102)
Schoeps MiniCMIT

Shock Mounts
for Slip-on Windshields

Rycote has designed the INV-6 HEAVY and INV-7HG MKIII shock mounts for use with slip-on windshields. Ideal for use with Super-Softie, Classic-Softie and BBG Windshield models, these robust shock mounts provide excellent isolation for boom pole and stand mounting applications.

The INV-7HG MKIII is one of our most popular InVision Broadcast & Film shock mounts. Suitable for 19-34mm diameter mics, the incorporated Duo-Lyre shock mount has a special ‘soft’ grip moulded into the clip. This securely holds the microphone, preventing any slippage or twisting and providing the necessary stability for slip-on windshields and front-heavy microphones.

Shock Mounts
for Slip-on Windshields

Rycote has designed the INV-6 HEAVY and INV-7HG MKIII shock mounts for use with slip-on windshields. Ideal for use with Super-Softie, Classic-Softie and BBG Windshield models, these robust shock mounts provide excellent isolation for boom pole and stand mounting applications.

The INV-7HG MKIII is one of our most popular InVision Broadcast & Film shock mounts. Suitable for 19-34mm diameter mics, the incorporated Duo-Lyre shock mount has a special ‘soft’ grip moulded into the clip. This securely holds the microphone, preventing any slippage or twisting and providing the necessary stability for slip-on windshields and front-heavy microphones.

InVision
Softie Lyre Mount

Suitable for microphones from 19-34mm in diameter, the InVision Softie Lyre Mount uses the Lyre system to provide complete isolation against handling and cable-borne noises. Supplied with a lightweight Pistol-grip handle for handheld applications, this flexible system is has a 3/8” thread fitting for boom-pole mounting. With the Duo-Lyre providing support for slip-on windshields including the Super-Softie, Classic-Softie, and BBG Windshield, this flexible, robust, cost-effective shock mount is built to withstand modern day ENG and location recording.

InVision
INV-6 Soft

Suitable for microphones from 19-34mm in diameter, the InVision-6 Soft uses the extremely robust patented Rycote Lyre® 62 Shore shock mounts system to provide massive reduction handling noise.

Supplied with integrated cable clamp for cable-borne noise reduction.

Compatibility

Error
Provided file /www/rycote_837/public/wp-content/uploads/2020/04/Boom-Shock-Mounts-2017-latest-1.xlsx does not exist!

Videos and images