SKU RYC021505

Windjammer WJ5

SKU RYC021505
  • Suitable for windshield kit 5
  • Reduces wind noise when recording outdoors
  • For very bad wind conditions try adding a Hi Wind Cover
Description
The windjammer is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a windjammer fitted over a windshield up to 50dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.
Warranty

Warranty Rycote

The Rycote European Warranty offers 24-month coverage for Rycote products purchased within the European Union, Iceland, Norway, Switzerland, and Turkey.

MANUFACTURER’S LIMITED WARRANTY
Rycote Microphone Windshields Ltd (“Rycote”) warrants to purchasers of Rycote manufactured products (“Products”) within the European Union, Iceland, Norway, Switzerland and Turkey (“Purchasers” or a “Purchaser” as the context may require) that during the warranty period (as defined below), Rycote or a Rycote authorised distributor will, in a commercially reasonable time, remedy defects in materials, design and workmanship in Products free of charge by repairing or, should Rycote in its discretion deem it necessary, replacing the Product in accordance with this Warranty (unless otherwise required by law). This Warranty is only valid and enforceable in the country where the Purchaser has purchased the Product provided that Rycote has intended the Product for sale in that country. However, if the Purchaser purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and Rycote originally intended the Product for sale in one of those countries, this Warranty is valid and enforceable in all of those above listed countries.

WARRANTY PERIOD
The warranty period starts on the date of the Product’s original purchase by the first end-user Purchaser and expires twenty four months after that date (hereinafter the “Warranty Period”). The Warranty Period will not be extended or renewed or otherwise affected due to subsequent resale, Rycote authorised repair or replacement of the Product.

HOW TO GET WARRANTY SERVICE
If a Purchaser wishes to make a claim under this Warranty, the Product or the affected part (if it is not the entire Product) should be returned to a Rycote authorised distributor. Contact Rycote on sales@rycote.com for further details on how to make a claim. Information concerning Rycote distributors can be found on the Rycote website. Any claim under this Warranty is subject to the Purchaser notifying Rycote or a Rycote authorised distributor of the alleged defect within a reasonable time of it having come to the attention of the Purchaser and in any event no later than expiry of the Warranty Period. When making a claim under this Warranty, the Purchaser will be required to provide: a) the Product (or the affected part) and b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase & the Product type.

WHAT IS NOT COVERED?
This Warranty does not cover a) normal wear and tear, b) defects caused by rough handling (including, without limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), or c) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Rycote (e.g. as set out in the Product’s user guide) and/or e) other acts beyond the reasonable control of Rycote. This Warranty does not cover defects or alleged defects caused by the fact that the Product was used with otherwise than for its intended use. This Warranty is not enforceable if the Product has been modified or repaired by anyone other than a Rycote authorised distributor or if it is repaired using unauthorised spare parts (to be determined in the sole discretion of Rycote). This Warranty is not enforceable if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes in such conditions; to corrosion, to spillage of food or liquid or to influence from chemical products.

OTHER IMPORTANT NOTICES
If the Product is found not to be covered by the terms and conditions of this Warranty, Rycote and its authorised distributors reserve the right to charge a handling fee. When repairing or replacing the Product, Rycote may use products or parts that are new, equivalent to new or re-conditioned.

LIMITATION OF RYCOTE’S LIABILITY
This Warranty replaces all other Rycote warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s), Rycote does not assume any liability for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, Rycote’s liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of Rycote or in case of death or personal injury resulting from Rycote’s negligence.

Device Compatibility

Shotgun Mic

  1. beyerdynamic MCE 86 N (C) S
    The MCE 86 II replaces the earlier MCE 86/87 as a short rifle microphone for camera and general use. The construction and integral filter minimise sensitivity to wind and zoom motor noise. It uses an electronic output and can feed long cable runs. The basic version is phantom powered; the suffix S is phantom or battery, and can drive unbalanced XLR or 3.5mm jack inputs. The S version weighs 120g and is 310mm long.
  2. sony ECM 672
    A supercardioid short-rifle electret condenser microphone. It has a two position low-cut filter and battery status indication. It is suitable for mounting on Sony cameras and camcorders.
  3. shure VP89M
    The VP89 is a professional shotgun condenser microphone for use in critical broadcast and media production applications. Designed with interchangeable long, medium, and short capsules, the VP89 models provide scalable, superior off-axis rejection for focus and flexibility in a wide variety of on-site locations.
  4. beyerdynamic MC 736
    For more information on this specific microphone, visit the brand website.
  5. sennheiser ME 80 K3U
    A short-shotgun capsule for use with various K-series power modules - measurements given with the K3U. [The K3U (XLR) or K3N (Tuchel) powering module had balanced output, the K1 unbalanced, and the K30AV was a transformerless o/p with multipin connector and non-standard powering.]

FAQ

No Questions
Go back
Show more