Rycote’s Studio Kit is fast and easy to use, and has also proved harder-wearing, more vibration-resistant and better at protecting your mic from vocal pops and thumps without high-frequency loss, than any traditional elasticated microphone suspensions. If you record vocals, you owe it to yourself to try one. Go for the Universal solution, and let the Studio Kit rock your vox!
InVision USM Studio Kit
- Fits any large-diaphragm recording mic from18-68mm in diameter
- USM offers up to 12dB better isolation against vibrations
- Pop Filter provides up to 20dB pops and thumps attenuation
Rycote’s Studio Kit is fast and easy to use, and has also proved harder-wearing, more vibration-resistant and better at protecting your mic from vocal pops and thumps without high-frequency loss, than any traditional elasticated microphone suspensions. If you record vocals, you owe it to yourself to try one. Go for the Universal solution, and let the Studio Kit rock your vox!
-
Weight0.2 kg
-
To Fit Mic DiameterSuitable for Large Diaphragm recordning microphones
-
Total Length300 mm
Warranty Rycote
The Rycote European Warranty offers 24-month coverage for Rycote products purchased within the European Union, Iceland, Norway, Switzerland, and Turkey.
MANUFACTURER’S LIMITED WARRANTY
Rycote Microphone Windshields Ltd (“Rycote”) warrants to purchasers of Rycote manufactured products (“Products”) within the European Union, Iceland, Norway, Switzerland and Turkey (“Purchasers” or a “Purchaser” as the context may require) that during the warranty period (as defined below), Rycote or a Rycote authorised distributor will, in a commercially reasonable time, remedy defects in materials, design and workmanship in Products free of charge by repairing or, should Rycote in its discretion deem it necessary, replacing the Product in accordance with this Warranty (unless otherwise required by law). This Warranty is only valid and enforceable in the country where the Purchaser has purchased the Product provided that Rycote has intended the Product for sale in that country. However, if the Purchaser purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and Rycote originally intended the Product for sale in one of those countries, this Warranty is valid and enforceable in all of those above listed countries.
WARRANTY PERIOD
The warranty period starts on the date of the Product’s original purchase by the first end-user Purchaser and expires twenty four months after that date (hereinafter the “Warranty Period”). The Warranty Period will not be extended or renewed or otherwise affected due to subsequent resale, Rycote authorised repair or replacement of the Product.
HOW TO GET WARRANTY SERVICE
If a Purchaser wishes to make a claim under this Warranty, the Product or the affected part (if it is not the entire Product) should be returned to a Rycote authorised distributor. Contact Rycote on sales@rycote.com for further details on how to make a claim. Information concerning Rycote distributors can be found on the Rycote website. Any claim under this Warranty is subject to the Purchaser notifying Rycote or a Rycote authorised distributor of the alleged defect within a reasonable time of it having come to the attention of the Purchaser and in any event no later than expiry of the Warranty Period. When making a claim under this Warranty, the Purchaser will be required to provide: a) the Product (or the affected part) and b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase & the Product type.
WHAT IS NOT COVERED?
This Warranty does not cover a) normal wear and tear, b) defects caused by rough handling (including, without limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), or c) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Rycote (e.g. as set out in the Product’s user guide) and/or e) other acts beyond the reasonable control of Rycote. This Warranty does not cover defects or alleged defects caused by the fact that the Product was used with otherwise than for its intended use. This Warranty is not enforceable if the Product has been modified or repaired by anyone other than a Rycote authorised distributor or if it is repaired using unauthorised spare parts (to be determined in the sole discretion of Rycote). This Warranty is not enforceable if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes in such conditions; to corrosion, to spillage of food or liquid or to influence from chemical products.
OTHER IMPORTANT NOTICES
If the Product is found not to be covered by the terms and conditions of this Warranty, Rycote and its authorised distributors reserve the right to charge a handling fee. When repairing or replacing the Product, Rycote may use products or parts that are new, equivalent to new or re-conditioned.
LIMITATION OF RYCOTE’S LIABILITY
This Warranty replaces all other Rycote warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s), Rycote does not assume any liability for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, Rycote’s liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of Rycote or in case of death or personal injury resulting from Rycote’s negligence.
Device Compatibility
Large Studio Mic
-
behringer C1The C-1 microphone is a home recording enthusiast’s dream come true! This professional-quality condenser microphone is designed to capture your sounds with incredible realism, sensitivity and accuracy. With the C-1’s outstanding cardioid pickup pattern for excellent sound source separation and feedback rejection, these ultra-low noise mics are an excellent choice for any recording scenario – and rugged enough to go the distance! With a handy swivel stand mount included in the sleek transport case, the C-1 just may be the only microphone your studio will need.
-
cadprofessionalmicrophones Microphones M177Using the latest computer modelling tools has resulted in a microphone that features the best of old world and new world technology at affordable cost. The M177 features a single pattern version of the original Equitek E-300 capsule. An externally biased capsule, it has a gold sputtered 1.1 diaphragm. The M177 has a high speed, low noise operational amplifier head amp, coupled with a new discrete high efficiency power supply circuit. This results in incredibly low noise, low distortion and fast transient response. The M177 can be used with 24 to 48V phantom supplies.
-
akg C214The C 214 is a lower cost version of the C 414 using a large diaphragm (1 inch) back electret capsule. It is single-sided and fixed cardioid pattern. The capsule is internally suspended in the die-cast body, making it extremely robust. It can also work with a Max SPL of 156 dB due to the provision of a 20 dB pad.
-
bockaudio Bock 151The Bock 151 is a lower-priced version of the 251 microphone with a fixed cardioid pattern. A brite/normal”switch is added to allow alternative HF responses – “brite” gives a fully extended HF to match modern capacitor microphones
-
berliner USA U7The U7 is a large-diaphragm studio microphone with a fixed polar pattern. The capsule is a centre contact type with a 6-micron gold-evaporated diaphragm. The impedance converter uses a GE6072 tube (valve) and the output is transformer coupled.
-
neumann U 87 AiThe U 87 is probably the best known and most widely used Neumann studio microphone. It is equipped with a large dual diaphragm capsule offering three directional patterns: omnidirectional, cardioid and figure-of-8. These are selectable with a switch below the head-grille. A 10dB attenuation switch is located on the rear. This enables the microphone to handle sound pressure levels up to 127dB without distortion. In addition, the low-frequency response can be reduced to compensate for the proximity effect.
-
audiotechnica AT 3060A large-diaphragm tube design that does not need a dedicated power supply - it operates from 48V phantom power. The cardioid back-electret condenser element provides high sensitivity and smooth reproduction with low noise levels. The tube is hand-selected and shock-mounted, and the precision-machined, nickel-plated brass acoustic element baffle provides enhanced element stability. A large coupling transformer provides superior low-frequency linearity.
-
adk HamburgThe ADK Hamburg Mk8 Large Diaphragm Condenser Microphone is a new and upgraded version of the popular Hamburg Edition with a More Fine-Tuned Response-Curve Designed to Replicate a Vintage Late 1950’s German Tube (Valve) Mic. The Hamburg Mk 8 is the Eighth Generation of ADK Microphones – offering a Mellow, Robust Tonality.
-
bockaudio Bock 195The Bock 195 is a fixed pattern studio microphone with a large (25 mm) diaphragm capsule – dual symmetrical backplate (K67 style). The electonics are Class A FET with a transformer output. This transformer is the oversize version used in the 151 and 251 microphones. Switching supplies and oscillators are avoided. The Fat”switch position introduces a low end boost between 10 Hz and 400 Hz.
-
audiotechnica AT 4047/SVDesigned for professional recording and critical applications in broadcast and live sound, the AT4047/SV has a transformer-coupled output and specially-tuned element, which provide sonic characteristics reminiscent of early FET studio microphone designs. It offers exceptionally low self-noise, wide dynamic range and high SPL capability, and has gold-plated, specially-contoured and aged, dual-diaphragms.Switchable 80Hz hi-pass filter and 10dB pad.
-
akg C414 B-XliiiThe C414 XLII multi-pattern condenser microphone offers a choice of nine polar patterns for the perfect sonic capture for every application. A peak hold LED displays even the shortest overload peaks. For live sound applications and permanent installations, all controls can easily be disabled for trouble-free use. The C414 XLII version differs from the C414 XLS version in one major respect – the capsule. The C414 XLII's slight presence boost and impressive spatial reproduction are both similar to the legendary AKG C12 microphone from 1953.
-
cadprofessionalmicrophones Microphones GXL3000The GXL3000 is a multipattern FET condenser, offering three pickup patterns via a switch on the mic body: cardioid, omni, figure-of-8. Fore more information visit brand website.
-
bockaudio Bock 251The Bock Audio 251 large-diaphragm tube condenser microphone is a faithful sonic re-creation of the famous vintage Telefunken ELAM 251 manufactured by AKG over 50 years ago, these collectors items are now extremely rare and exchange hands for thousands of pounds and due to their age, don’t offer the reliability needed for a modern studio.
-
shure KSM32Side-address cardioid condenser microphone for studio recording and live sound. A large diaphragm Class-A transformerless design. Max SPL increases to 139dB for 2.5k* load
-
sennheiser MK4The MK 4 is a large-diaphragm true condenser microphone for professional studio recordings. Featuring fine resolution and outstanding sound quality, the MK 4 is easy to handle and excellent value for money, making it an ideal choice for professional project studios and home recordists. It features a 1 inch true condenser capsule based on the acoustics of the e 965 high-end vocal mic, optimised for recording. The MK 4 is made in Germany, its transducer being manufactured in the same clean room as all high-end Sennheiser condenser capsules.
-
røde NT1-AAn improved version of the original NT1. It retains the large capsule (25mm) with its gold-sputtered diaphragm along with the internal shock-mounting but now uses state-of-the-art surface mount electronics to provide an ultra-low noise level through its transformerless circuitry. The design is rugged and finished with a heavy-duty nickel finish.
-
-
audiotechnica AT 4050Superior performance for studio recording and live sound applications is provided by the AT4050's remarkable combination of warm, transparent sound and super-high SPL capability. It features three switchable polar patterns (omni, cardioid, and figure-of-8), a large-diaphragm design for extended frequency response, and symmetrical direct-coupled electronics for excellent transient response and low distortion. Switchable 80Hz hi-pass filter and 10dB pad.