SKU RYC011001

20mm BBG Windshield

SKU RYC011001
  • Great windshielding, in a smaller package
  • Perfect for hand-held operations and interviews
  • Optional Windjammer available for windiest conditions
Description
Made to offer the wind attenuation properties of a full sized windshield in a much smaller package, the BBG Windshields are designed to slip onto the body of the microphone. This allows the microphone to be hand-held or shock-mounted with a Lyre suspension.

Perfect for short microphones, the BBG Windshield are suitable for low-profile boom applications as well as for use in hand-held operations and interviews. They are widely used for microphones with bulbous ends and ORTF microphone pairs, where the maximum head diameter is 80 mm.

The windshield is constructed of the same material as the full size modular windshields, but rather than clipping to a microphone suspension, the Windshield is mounted directly on the microphone, by a grommet gripping the microphone body. The microphone is pushed through the grommet, to completely enclose the microphone capsule.

The Windshield consists of two halves, which can be separated, to fit microphones with a ball-head or tapered body from inside the windshield. For additional wind protection a furry Windjammer cover is available.
Specifications
  • Max Wind noise Attenuation
    30dB
Warranty

Warranty Rycote

The Rycote European Warranty offers 24-month coverage for Rycote products purchased within the European Union, Iceland, Norway, Switzerland, and Turkey.

MANUFACTURER’S LIMITED WARRANTY
Rycote Microphone Windshields Ltd (“Rycote”) warrants to purchasers of Rycote manufactured products (“Products”) within the European Union, Iceland, Norway, Switzerland and Turkey (“Purchasers” or a “Purchaser” as the context may require) that during the warranty period (as defined below), Rycote or a Rycote authorised distributor will, in a commercially reasonable time, remedy defects in materials, design and workmanship in Products free of charge by repairing or, should Rycote in its discretion deem it necessary, replacing the Product in accordance with this Warranty (unless otherwise required by law). This Warranty is only valid and enforceable in the country where the Purchaser has purchased the Product provided that Rycote has intended the Product for sale in that country. However, if the Purchaser purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and Rycote originally intended the Product for sale in one of those countries, this Warranty is valid and enforceable in all of those above listed countries.

WARRANTY PERIOD
The warranty period starts on the date of the Product’s original purchase by the first end-user Purchaser and expires twenty four months after that date (hereinafter the “Warranty Period”). The Warranty Period will not be extended or renewed or otherwise affected due to subsequent resale, Rycote authorised repair or replacement of the Product.

HOW TO GET WARRANTY SERVICE
If a Purchaser wishes to make a claim under this Warranty, the Product or the affected part (if it is not the entire Product) should be returned to a Rycote authorised distributor. Contact Rycote on sales@rycote.com for further details on how to make a claim. Information concerning Rycote distributors can be found on the Rycote website. Any claim under this Warranty is subject to the Purchaser notifying Rycote or a Rycote authorised distributor of the alleged defect within a reasonable time of it having come to the attention of the Purchaser and in any event no later than expiry of the Warranty Period. When making a claim under this Warranty, the Purchaser will be required to provide: a) the Product (or the affected part) and b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase & the Product type.

WHAT IS NOT COVERED?
This Warranty does not cover a) normal wear and tear, b) defects caused by rough handling (including, without limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), or c) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Rycote (e.g. as set out in the Product’s user guide) and/or e) other acts beyond the reasonable control of Rycote. This Warranty does not cover defects or alleged defects caused by the fact that the Product was used with otherwise than for its intended use. This Warranty is not enforceable if the Product has been modified or repaired by anyone other than a Rycote authorised distributor or if it is repaired using unauthorised spare parts (to be determined in the sole discretion of Rycote). This Warranty is not enforceable if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes in such conditions; to corrosion, to spillage of food or liquid or to influence from chemical products.

OTHER IMPORTANT NOTICES
If the Product is found not to be covered by the terms and conditions of this Warranty, Rycote and its authorised distributors reserve the right to charge a handling fee. When repairing or replacing the Product, Rycote may use products or parts that are new, equivalent to new or re-conditioned.

LIMITATION OF RYCOTE’S LIABILITY
This Warranty replaces all other Rycote warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s), Rycote does not assume any liability for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, Rycote’s liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of Rycote or in case of death or personal injury resulting from Rycote’s negligence.

Device Compatibility

Small Diaphragm Condenser

  1. neumann KM 180 Series
    For more information on this specific microphone, visit the brand website.
  2. akg C391 B
    The C391 B high-performance small-diaphragm condenser microphone is a combination of the Blue Line Series CK91 and the SE300 pre-amplifier. The microphone has a cardioid polar pattern, a low self-noise and very good transient response for a bright and brilliant sound. It also features the ability to quickly interchange its capsule with one of the other capsules of the Blue Line Series, making it an excellent mic for demanding broadcast applications. The C391 B provides a switchable bass roll-off/attenuator with three positions: flat, 75Hz and 10db attenuation.
  3. beyerdynamic MC 728
    For more information on this specific microphone, visit the brand website.
  4. schoeps CMC Series (With Cut 1)
    The capsules of condenser microphones (the only type which SCHOEPS manufactures) can't be connected directly to microphone cables or inputs; a microphone amplifier is required in between. Thus a complete microphone of the Colette series comprises any of the twenty available types of capsules combined with an amplifier. The CMC 6 Ug is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognises the supply voltage and adjusts itself automatically. Its performance characteristics remain essentially the same either way; mainly, the difference is that the current drawn at 12 Volts is greater than at 48 Volts. However, the 12-Volt mode consumes less power and might be preferred for battery-powered recording.
  5. neumann KM100F
    For more information on this specific microphone, go to Neumanns website at http://neumannusa.com.
  6. neumann KM 185
    The Series 180 consists of three compact microphones (KM 183, 184, and 185) with patterns that satisfy the demands of all common studio applications. Because of its optimised mechanical construction and conscious omission of modularity, which is unnecessary in many cases, the Series 180 is ideal for economy-minded production and home recording studios. The KM185 pressure gradient transducer features a very smooth frequency response, not only for the deg; axis, but also for lateral (off-axis) sound incidence.
  7. oktava MC 012 / MK 012
    A compact, high-quality capacitor microphone which uses interchangeable capsules to provide a choice of cardioid, hypercardioid or omnidirectional pickup patterns. The MC 012 is designed for sound recording studios and reinforcement at cinema, TV and radio studios, and during theatre and entertainment events.

Shotgun Mic

  1. beyerdynamic MCE 87vs
    Short shotgun microphone for use with semi-professional and domestic camcorder systems. MCE87 has internal battery powering and similar electrical specification to MCE86.
  2. neumann KMR 82
    The KMR 82 is a shotgun microphone with a high directivity that remains within the acceptance angle independent of frequency. The advantage is that a sound source, for example, an actor on stage will not change its apparent tonal balance when moving within this area. The KMR 82 is very often used on stage.
  3. beyerdynamic MC 736
    For more information on this specific microphone, visit the brand website.
  4. beyerdynamic MC 726
    For more information on this specific microphone, visit the brand website.
  5. beyerdynamic MCE 86 N (C) S
    The MCE 86 II replaces the earlier MCE 86/87 as a short rifle microphone for camera and general use. The construction and integral filter minimise sensitivity to wind and zoom motor noise. It uses an electronic output and can feed long cable runs. The basic version is phantom powered; the suffix S is phantom or battery, and can drive unbalanced XLR or 3.5mm jack inputs. The S version weighs 120g and is 310mm long.
  6. beyerdynamic MC 737
    For more information on this specific microphone, visit the brand website.
  7. røde NTG-1
    A lightweight shotgun condenser microphone for general film and TV use. The output is electronically balanced and uses low-noise surface-mount components. It is extremely lightweight and has both a wide bandwidth and a controlled polar response.
  8. beyerdynamic MC 837
    Long shotgun microphone with switchable high-pass filter.
  9. beyerdynamic MC 727
    For more information on this specific microphone, visit the brand website.
  10. neumann KMR 81i
    The KMR 81 is a shotgun microphone with a high directivity that remains within the acceptance angle independent of frequency. The advantage is that a sound source, for example, an actor on stage - will not change its apparent tonal balance when moving within this area. The KMR 81 has been specifically designed for electronic news gathering.
  11. beyerdynamic MC 836
    Short shotgun microphone with low frequency roll-off switch.

Large Studio Mic

  1. milab VIP-50
    The VIP-50 is one of the most sophisticated vocal recording condenser microphones ever made, this transformer-less model offers variable patterns, 200/500 Hz high pass filters, -10/-20 dB pre-attenuation, and a rectangular large dual membrane capsule. It is switchable between omnidirectional, wide cardioid, cardioid, hypercardioid and figure of eight polar patterns. Includes Rycote USM shock mount and individual frequency chart.
  2. nady SCM 960
    The SCM-960 Studio Condenser Microphone from Nady is designed for project studio recording, podcasts, light broadcast applications, and similar scenarios. The large diaphragm condenser microphone features an internal shockmount for reducing handling noise and switchable cardioid and omnidirectional patterns.

FAQ

No Questions
Go back
Show more